All rights reserved(C) Foshan Yincai Powered by www. 300.cn 粤ICP备16073439 Manager
Add:No.802,Bd No.7,2nd phrase industrial zone of TianFuLai,RongGui Town, ShunDe District,FoShan City,GuangDong
Ph/WhatsApp/Wechat: 008615876128180
Glass ink_Two component
DC SERIEIES Two-component solvent base screen printing ink is a non - baking - curing coating glass ink. It has the characteristics of high hardness, excellent wear resistance, strong adhesion, high gloss and good leveling. At the same time, it has excellent water resistance, solvent resistance, impact resistance and flexibility.It is suitable for printing ordinary glass , toughened glass, stainless steel, metal products, aluminum sheet, amino resin, epoxy resin coating board, ferrochrome, electric nameplate and various process glass products.
Item |
Glass ink_Two component |
Code |
DC series |
Capacity |
1kg/can |
G/Weight |
1.2kg |
Glossiness |
Glossy |
Reducer & Rate |
YC-02/3%-8% |
Hardener |
5% |
Drying time |
Cured by room temperature 24H |
Storage |
Sealed and dry place |
Printing Capacity |
(300mesh) 30sqm/kg |
Application |
Glass, porcelain, ceramics, porcelain enamel, metal, printing with screen printing machine. |
How to use?
1.Mixed hardener with 5% |
Apply the ink Spatulas Spoon mixing hardener 5% to 10% with ink, and mixing slowly, do not mix air into the ink. If there have much bubble, still there for a while until the bubble are disappear. The ink with hardener must use up in 8 hours. If could not finish, need to re-mixed hardener with same rate. Do not mix new ink with used one |
2.Mixed thiner/diluent with 8% to 10% |
After Mixed with hardener, mixing the thinner/diluent 8% to 10% with spatulas spoon. Must mixing slowly, until the ink look flow. |
2.Stard to print |
Lied the ink on the stencil/screen plate, apply the squeegee 75A printing onwith 200 mesh to 300 mesh. and check the printed ink whether smooth. |
3.Drying time |
Drying the printed ink 4 hours by room temperature. For better adhesive, still there more 24H to 48H having good adhesive. It need to put on the drying rack and a no-dust room. |
4.Testing |
Depend on your request, testing the ink by the our testing way or your standarder. |
ITEM |
RESULT |
TEST WAY |
ADHESION |
100% |
Cross-cut tape after totally dryed. The tape peel off. |
HARDNESS |
H |
Pencil hardness 450X500g |
ABRADABILITY |
200 times |
Rub it by eraser, rub and back as one time. |
THERMOSTABILITY |
NONE |
Keep in 100°C/48hours |
Low temperature resistance |
NONE |
Keep in -20°C/48hours |
Water resistance |
NONE |
Dip in tap water48 hours |
Acid-resistance |
NONE |
Dip in 5% acid solvent 24hours |
Alkali-resistance |
NONE |
Dip in 5% NaOH solvent 24 hours |
Gas-resistance |
NONE |
Wiping by gas force 1kg, wipie and back as 1 time. 200times. |
Alcohol-resistance |
NONE |
Wiping by alcohol force 1kg, wiping and back as 1 time. 100times |
Toluol-resistance |
NONE |
Wiping by toluol force 1kg, wipe and back as 1 time, 200 times. |
Butanone-resistance |
NONE |
Wiping by butanone force 1kg, wipe and back as 1 time, 200 times. |
Printing effect